"Jet-Stream" Showerhead^®

Take Our 2-Minute Shower Head H2O Volume Test

You'll need:

• A 3-gallon bucket (any known size will do) to capture the shower water.
• A stopwatch or watch with a second hand to time how long it takes the amount of water to fill the bucket.
• You may want to find someone to assist you.

Here's what to do:

1. Before installing The "Jet-Stream" Showerhead^®, turn on the old shower and adjust hot and cold-water valves all the way open for the maximum flow rate of the shower and feel the pressure of the shower with your hand.
2. Place the bucket under the shower and capture all of the water, timing how long the bucket takes to fill completely (see chart below). If uncertain of the results, repeat the test and have a second person use the watch to time the test. Caution!  Follow the 2-Minute Installation carefully as improper installation directly effects the quality of the shower! 
3. After installing the water & energy-efficient, high-pressure, 1.5 gpm "Jet-Stream" Showerhead®, by hand, perform the same test for the same length of time which shows you the water volume savings and see and feel the pressure difference.

Gallons Per Minute	"Jet-Stream"® Savings	Gallons Of Water Used During A 10-Minute Shower
12.0	87.5%	120
10.0	85.0%	100
8.0	81.3%	80
6.0	75.0%	60
4.0	62.5%	40
3.0	50.0%	30
2.0	25.0%	20
1.5	"Jet-Stream"®	15

Important!  For a FREE 1-year and 10-year usage and dollar savings custom report that you can print and retain for your records, use our 2-Minute Savings Calculator to enter the bucket size and how long it took to fill it to get the Gallons Per Minute (gpm), along with your your number of showers and utility bill information.